Where To Buy Engineered Wood Siding
Engineered wood siding is much lighter than natural wood, which is considered one of its positive attributes. Unfortunately, it can also lead to problems during installation that can lead to its downfall.
where to buy engineered wood siding
Because the material is so light and easy to handle, and because it looks so much like wood, improper installation can occur very easily. Anyone not taking particular care and using tools that convey less force may weaken the siding leading to future problems.
When the material has been installed incorrectly, painted incorrectly, the finish has been damaged, or in some instances where a manufacturer's defect leads to a crack in the finish, the siding is now susceptible to moisture. Like any wood composite material, if moisture infiltrates the surface of the planks, the siding may now swell, warp, or begin to rot.
Earlier types of engineered siding had a lot of issues with moisture, and while some of these have been resolved, the issue may still persist if the siding is installed incorrectly or if the finish becomes damaged in some way. When this happens the only way to correct the issue is to remove the afflicted boards and replace them.
Engineered wood siding is a composite material made of wood and resin, resembling the beautiful look of natural wood without the extensive maintenance required from solid wood siding. Some of the many benefits of engineered wood siding include:
The second advantage is its easy installation. St-Laurent engineered wood siding is drawn and fabricate with an interlock or overlap system that eliminate visible nails and provides a quick & easy installation. The automatic self-alignment system helps the siding to be aligned and tight fit at any time. In addition, St-Laurent products can be cut with standard tools for wood.
Fiber cement siding has been around for a bit longer than engineered wood. This siding option is still more durable and cost effective than wood or vinyl siding. Fiber cement is often made with Portland cement, wood pulp or sand, fly ash, and water.
Fiber cement is still a more durable choice than wood or vinyl. Fiber cement siding also has some fire resistant qualities, making them a great choice for cautious homeowners or homes in wildfire-prone areas. The siding is also resistant to rot and insects.
Fiber cement requires special tools for installation. It also weighs about 1.5 more than wood siding. Installers need to wear protection while cutting fiber cement siding due to harmful dust. It comes in 12-foot long planks.
Engineered wood is an up and coming style of siding that simulates wooden siding, but offers a more durable and consistent product. Using science and compressed wood, LP SmartSide, our engineered wood of choice, offers superior protection agains hail, wind, moisture, fungal decay, and termites.
LP SmartSide Trim & Siding is an engineered stranded composite wood siding manufactured in Tomahawk, Wisconsin. It provides homeowners the ability to maintain the natural beauty of wood without any of the maintenance. LP SmartSide offers a variety of exterior styles of siding and trim for your exterior home makeover.
Engineered wood siding comes in a variety of styles designed to mimic the most famous and highly-used siding trends of the last two centuries. Enjoy all the beauty and elegance of wooden siding styles with the benefits of engineered materials built to last.
I have been researching siding options for months, trying to find the most sustainable siding option that will fit into our budget. For us, picking a siding comes down to cost, ease of installation, maintenance and durability, and its impact on the environment. I was trying to find the perfect siding that will do the least harm to the environment, will help protect our house from water damage, and that we can afford. What I found was a pretty hard decision. After months of research, I have concluded that there is no perfect siding material, yet. There are pros and cons with every type of siding and after weighing all of those, we will likely choose engineered wood siding for our home renovation.
Engineered wood siding is comprised of wood strands cut from a sustainably harvested tree that go through a resin, wax and treatment process. The strands are compressed to form a structurally stable piece of engineered wood. Due to the treatment process, the boards are rot and termite resistant. The siding comes in clapboard (also called lap siding), shingle, vertical, and panel configurations. They come in cedar texture finishes as well as smooth finishes. The siding comes pre-primed and can even be pre-finished with paint.
Engineered Wood Siding and Engineered Wood Trim (EWST) are categories of composite panels used for decorative surfacing that have been designed and manufactured to perform in interior and exterior exposure applications with the appearance of traditional wood. These advanced composites can be engineered with enhanced resistance to moisture, dimensional stability and protection against fungal decay and termites.
The engineered properties translate into long-lasting durability allowing for decades of service life while maintaining their attractive appearance. Todays engineered wood siding and wood trim products are highly versatile and come in many forms including sophisticated woodgrains and embossed surfaces.
Because engineered wood siding and trim are a types of composite panels made from residual wood fiber, such as chips and shavings, they are carefully value engineered for each application. This results in product solutions which are substantially less expensive than alternatives.
Engineered wood siding is created in a factory, where it is primed and then painted with a long-lasting pigment. Any cut edges are repainted on the job site, but generally, there is no sealing needed after installation.
While engineered wood siding is typically a higher cost than vinyl siding, some homeowners see it as well worth the investment. The finish is beautiful, with a natural look that complements certain architectural styles.
Our engineered siding is warranted not to scratch or peel. Our siding also has a three-year warranty against fading. Should you accidentally damage your siding, there is replacement paint that you can purchase to touch up your siding.
Yes, engineered wood siding gives you the look and feel of real wood without being subject to many of the threats that can damage traditional wood finishes. It will stand up to termites, fungus, and other hazards.
It is the newest generation of what used to be called composite wood siding. Engineered wood is made from chips of wood that are compressed with a water-resistant glue into both planks and panels for exterior siding. It is a similar material to OSB (Oriented Strand Board) used for sheathing, but with a hardened outer surface that can be ordered in textures to mimic real wood and pre-primed for painting.
LP SmartSide treated engineered wood siding cuts out the time you spend dealing with warped and split pieces when properly stored and applied. Virtually every piece leaves the mill straight and ready to use.
There are several different material options for house siding: wood, metal, stone and stone veneer, vinyl, brick, fiber-cement, stucco and more. But, looking at the materials for siding is just scratching the surface! Delving deeper, we see many more options and sub-options.
For engineered wood siding, you can expect to pay between $10.50 and $16.50 per square foot installed. The $12.50 to $15.50 per sq.ft. range is in between the midrange and the high-end, while a somewhat fairer price range would fall in between $10.50 and $14.50 per sq.ft. installed.
With most wood siding projects, cuts are made to produce boards, or planks. How that surface appears indicates another sub-option dealing with grade. Boards where knots or other blemishes are visible are considered low grade, and less expensive.
This is also known simply as vertical board wood siding, or sometimes referred as barn-style. Vertical panels (boards) are lined up side-by-side, and all seams are covered by a strip called the Batten. The pattern is usually done in a uniform way, to convey a sense of craftsmanship.
Pine and Cedar are the common grains for split-log siding. Unlike the other wood options, it is very rare that this wood is painted or coated. Though with pine, it is best to stain it, to ensure the wood lasts longer. With cedar, staining and painting is unnecessary, but must still be cleaned no less than once a decade.
The R-value, or resistance to air flow, for wood hovers around 1.0, as one inch of wood is the standard measurement for exterior siding. Because of variation in grains, and styled options, the range is between R-value .80 and 1.35.
Much of what is said about Steel (above) can be said, in contrast, to Aluminum. Such that Aluminum is softer / more malleable. In regards to steel siding, though, corrugated panels are the traditional metal roofing and cladding material and can also be used for residential purposes, but not so much for house siding, where more premium profiles like standing seam, metal wall panels, and metal shingles are more commonly used.
The LP wood siding is made to be more appealing than the traditional vinyl, especially if you factor in its classic wood-grain finish which a lot of homeowners want. Even better, LP smart siding is available in a wide variety of styles to choose from, including different color shades as well as rustic polished types.
Both traditional vinyl and LP Engineered wood sidings offer a healthy variety of colors and designs to choose from. On the downside, this may be overwhelming to homeowners looking for the perfect curb appeal.
If you travel around the United States, visiting old towns just off the highway, you will note a similar pattern, where historical civic buildings and important religious structures employed durable materials, like masonry and stone, while homes and small commercial structures were constructed with wood. Most of these old wood buildings have newer siding. 041b061a72